Best picks

9 Best Propane Fire Pit Burner Kits (November 2026)

Updated on · By the Joe Joslin Outdoors team

The best propane fire pit burner kits include the Stanbroil Propane Gas Fire Pit Stainless Steel for compact round pits, the Skyflame LP Burner Connection Kit for replacing controls and hoses, and the GRISUN Upgraded 36 x 12 Inch Rectangular for linear fire tables.

On this page (9 sections)
  1. Our propane fire pit burner kit picks for built in pits and tables
  2. How we compared these propane fire pit burner kits
  3. Which propane fire pit burner kit size fits a built in pit?
  4. How much BTU does a propane fire pit burner kit need?
  5. Round ring or rectangular drop in pan: which should you buy?
  6. Do you need a full kit or just a connection kit?
  7. What ignition and safety features should a propane burner kit have?
  8. How do you install and care for a propane fire pit burner kit?
  9. Verdict: which propane fire pit burner kit should you buy?

The best propane fire pit burner kit for most built in pits is the Stanbroil 12 inch stainless ring kit, because it pairs a 92,000 BTU max ring with the hose, regulator, valve and fittings you need to connect a 20 lb tank. Our score weighs specs, features and buyer feedback against what you are shopping for.

A propane fire pit burner kit turns a wood pit or an empty fire table into a clean, repeatable flame. You get instant light, no smoke drift, and a flame height you can adjust from the valve.

The trade off is fit. A ring that is too large will not sit level, and a pan that is too wide will not rest on the ledge.

This guide compares nine kits that cover round rings, rectangular drop in pans, linear burners and control only kits. We checked sizes, BTU ratings, included hoses, ignition types and safety features against the needs of a built in propane fire pit.

If you are comparing heat for an open patio rather than a built in feature, start with our patio heaters guide instead.

Our picks at a glance

  1. 1 Stanbroil Propane Gas Fire Pit Stainless Steel
    Best for compact round pits

    Stanbroil Propane Gas Fire Pit Stainless Steel

    9.7/10 our score

    See it on Amazon
  2. 2 Skyflame LP Burner Connection Kit
    Best for replacing controls and hoses

    Skyflame LP Burner Connection Kit

    9.6/10 our score

    See it on Amazon
  3. 3 GRISUN Upgraded 36 x 12 Inch Rectangular
    Best for linear fire tables

    GRISUN Upgraded 36 x 12 Inch Rectangular

    9.5/10 our score

    See it on Amazon
  1. 4GRISUN 12 Inch Fire Pit Burner Ring

    GRISUN 12 Inch Fire Pit Burner Ring

    Best for 24 inch round pits
    Check it
  2. 5Hiorucet 12 Inch Fire Pit Burner Ring

    Hiorucet 12 Inch Fire Pit Burner Ring

    Best for a large parts bundle
    Check it
  3. 6VEVOR 36 x 12 inch Drop-in Fire

    VEVOR 36 x 12 inch Drop-in Fire

    Best for high output rectangular pits
    Check it
  4. 7Stanbroil 48 x 14 Inch Rectangular Drop-in

    Stanbroil 48 x 14 Inch Rectangular Drop-in

    Best for extra long fire features
    Check it
  5. 8gohantee Fire Ring Burner Valve Assembly KitCheck it
  6. 9Skyflame 19-inch Round Stainless Steel Drop-in FireCheck it

Our propane fire pit burner kit picks for built in pits and tables

The Stanbroil 12 inch kit leads for small round pits because the package is complete and clearly sized. The Skyflame connection kit leads for repairs because it fixes controls without forcing a new burner.

Rectangular and linear kits win only when your opening shape matches them.

1

Stanbroil Propane Gas Fire Pit Stainless Steel: Best for compact round pits

Stanbroil Propane Gas Fire Pit Stainless Steel, propane fire pit burner kits
9.7/10Our score
  • 12 inch round burner ring
  • 304 stainless steel
  • 92,000 BTU max
  • 1/2 inch female gas inlet
  • 18 inch flex gas line
  • 1 PSI x 4 ft hose and regulator
  • Shut-off valve with polished chrome flange and key

A complete 12 inch ring kit for small round built in pits, with the hose, regulator, valve and fittings included.

See it on Amazon

Pros

  • Complete kit in one box
  • 304 stainless steel construction
  • Cross-bar design for gas distribution

Cons

  • 12 inch ring limits opening size
  • Professional installation suggested

This kit suits a small round built in pit where you want one box to cover the burner, valve, hose and regulator. The 12 inch ring in 304 stainless steel is rated at 92,000 BTU max, so flame height will be strong for a compact pit.

The package includes a 1/2 inch female inlet, an 18 inch flex gas line, a 1 PSI x 4 ft hose and regulator, an air mixer with fittings, and a shut-off valve kit with a polished chrome flange and key. You still need fire media such as lava rock or fire glass.

Its cross-bar design aims for better gas distribution across the ring. That matters in daily use because even holes give a more even ring of flame instead of hot spots.

The main trade off is size. A 12 inch ring will look lost in a large opening and will not fill a rectangular fire table.

Stanbroil suggests professional installation, which is worth heeding if you have not worked with gas fittings before.

Stanbroil Propane Gas Fire Pit Stainless SteelCheck it on Amazon
2

Skyflame LP Burner Connection Kit: Best for replacing controls and hoses

Skyflame LP Burner Connection Kit, propane fire pit burner kits
9.6/10Our score
  • 1/2 inch straight gas key valve kit
  • 1/2 inch 150K BTU max air mixer valve
  • 60 inch hose with type-1 QCC-1 LP tank connection
  • 60 inch connecting hose
  • Built-in 0-30 PSI adjustable regulator

A connection and control kit for an existing propane burner, with a key valve, air mixer, regulator and hoses.

See it on Amazon

Pros

  • Adjustable regulator for flame control
  • Key valve at the fire pit panel
  • Fits fire pit tables and outdoor fireplaces

Cons

  • No burner ring included
  • Propane appliances only

This kit suits a fire pit whose burner still works but whose valve, regulator or hoses need replacement. It is a control kit, not a burner, so you keep your existing ring or pan and renew the connection path.

The box holds a 1/2 inch straight gas key valve kit with a 3 inch key, a 1/2 inch air mixer valve rated to 150K BTU max, a 60 inch hose with a type-1 QCC-1 tank connection, and a second 60 inch hose to connect the pit.

A built in regulator adjusts from 0 to 30 PSI with a red knob. Start at 0 PSI before use, then raise pressure slowly to set flame intensity.

That control helps on windy nights when a full open valve can push the flame too high.

Skyflame says the set fits outdoor vented propane pits, fire pit tables and outdoor fireplaces. It fits propane appliances only, so do not use it for natural gas.

Keep hoses away from high heat areas, and tighten connections with tools for a secure seal.

Skyflame LP Burner Connection KitCheck it on Amazon
3

GRISUN Upgraded 36 x 12 Inch Rectangular: Best for linear fire tables

GRISUN Upgraded 36 x 12 Inch Rectangular, propane fire pit burner kits
9.5/10Our score
  • 36 x 12 inch rectangular drop in kit
  • Linear burner and fire pit pan
  • Spark ignition with shut-off valve
  • Regulator hose and air mixer
  • Tempered glass wind guard
  • Stainless steel lid
  • 201 stainless steel pan and burner

An all in one 36 inch linear kit for DIY fire tables, with ignition, glass wind guard and a cover lid included.

See it on Amazon

Pros

  • Complete drop in package
  • Glass wind guard reduces flame disturbance
  • Lid protects the pit when not in use

Cons

  • 201 steel rather than 304
  • Igniter requires 1 AA battery, not included

This kit suits a rectangular fire table or a modern built in pit where you want a straight line of flame. The 36 inch linear burner sits in a 36 x 12 inch drop in pan, so the fire reads as a clean line rather than a ring.

The package is close to all in one. It includes the linear burner, fire pit pan, spark ignition with shut-off valve, regulator hose, air mixer and sealing tape.

A tempered glass wind guard helps steady the flame, and a stainless steel lid covers the pit when it is not in use.

The pan and burner use 201 stainless steel. That handles outdoor heat and weather, but it is a step below the 304 steel used in several other picks here.

The igniter needs 1 AA battery, which is not included.

Choose this if shape and completeness matter more than maximum steel grade. Skip it if your opening is round, because a 36 inch rectangle will not sit correctly in a round pit.

GRISUN Upgraded 36 x 12 Inch RectangularCheck it on Amazon
4

GRISUN 12 Inch Fire Pit Burner Ring: Best for 24 inch round pits

GRISUN 12 Inch Fire Pit Burner Ring, propane fire pit burner kits
9.2/10Our score
  • 12 inch round burner ring
  • 1/2 inch inlet
  • Upgraded ignition kit with shut-off valve
  • Non-whistle gas line
  • 0-20 PSI adjustable regulator
  • Air mixer, inlet plug, wrench and seal tape
  • Heavy duty stainless steel burner

A 12 inch ring kit sized for 24 inch pits or fire tables, with ignition, regulator and gas line included.

See it on Amazon

Pros

  • Sized for 24 inch pits
  • Drilled flame holes for smoother flow
  • Complete fittings and wrench included

Cons

  • Igniter requires 1 AA battery, not included
  • Fire glass not included

This kit suits a 24 inch round pit or a round fire table. GRISUN sizes the 12 inch burner ring for that opening, so the ring will sit with media around it instead of crowding the edge.

The package includes an upgraded ignition kit with shut-off valve, a non-whistle gas line, a 0-20 PSI adjustable regulator, an air mixer, an inlet plug, a wrench and seal tape. That covers most of the connection work in one order.

The burner uses heavy duty stainless steel, while connecting and ignition parts use brass and stainless steel. GRISUN says the flame holes are precision drilled rather than punched, which helps gas flow smoothly and cuts whistling.

The igniter needs 1 AA battery, not included. Fire glass is also not included, and GRISUN recommends 15 lb for this kit.

If you want a wind screen for a gusty patio, plan for that as a separate piece.

GRISUN 12 Inch Fire Pit Burner RingCheck it on Amazon
5

Hiorucet 12 Inch Fire Pit Burner Ring: Best for a large parts bundle

Hiorucet 12 Inch Fire Pit Burner Ring, propane fire pit burner kits
9.0/10Our score
  • 12 inch round burner
  • 16 piece kit
  • 4.4 ft propane regulator hose
  • 4 ft connect hose
  • 1/2 inch shut-off ball valve
  • 1/2 inch air mixer valve
  • Spark ignitor with mounting plate and wires
  • 304 stainless steel
  • Up to 92,000 BTU

A 16 piece 12 inch ring bundle with hoses, valve, air mixer and spark ignitor for propane pits.

See it on Amazon

Pros

  • Many fittings in one package
  • 304 stainless steel
  • Double concentric ring design

Cons

  • Many small parts to track during install
  • Fire media not included

This kit suits a buyer who wants every small fitting in one bundle. It packs 16 pieces around a 12 inch round burner, including hoses, a shut-off ball valve, an air mixer valve, a key valve and a spark ignitor.

The burner is hand crafted from 304 stainless steel and rated up to 92,000 BTU. A double concentric ring design spreads the flame across a wider circle, and drilled holes aim to avoid whistling noise.

The hose set includes a 4.4 ft propane regulator hose and a 4 ft connect hose. The ignitor set includes a mounting plate, wires, ground wire and screws, so you can mount controls through a panel.

The trade off is complexity. With 16 pieces, you need to lay out fittings before you start and keep track of adapters.

This is a good pick if you enjoy DIY work, and a slower pick if you want the fewest parts possible.

Hiorucet 12 Inch Fire Pit Burner RingCheck it on Amazon
6

VEVOR 36 x 12 inch Drop-in Fire: Best for high output rectangular pits

VEVOR 36 x 12 inch Drop-in Fire, propane fire pit burner kits
8.7/10Our score
  • 36 x 12 inch drop in fire pit pan
  • Rectangular stainless steel
  • 150,000 BTU propane fire pan
  • H-burner
  • 4 ft extended connection hose
  • 4.4 ft propane regulator hose
  • Igniter and valve
  • CSA certified accessories

A 36 inch rectangular pan with an H-burner rated at 150,000 BTU, aimed at larger built in openings.

See it on Amazon

Pros

  • High 150,000 BTU output
  • 304 stainless steel burner
  • Drainage hole to prevent water build up

Cons

  • Pan body listed as SUS201 in specifications
  • Large opening required

This kit suits a large rectangular opening where high output matters. The 36 x 12 inch pan holds an H-burner rated at 150,000 BTU, which is well above the round ring kits here.

VEVOR lists a 12 piece accessory set with a 4 ft extended connection hose, a 4.4 ft propane regulator hose, an igniter and a valve. The accessories carry CSA certification, and the pan has a drainage hole to reduce water build up.

The burner is 304 stainless steel, while the pan body is listed as SUS201 in the specifications. That split is worth noting if steel grade is a priority for long term outdoor use.

Three sizes are offered in the range, at 24, 30 and 36 inches, so measure your ledge before you choose. Fire glass is optional but helps the flame display.

This pan rewards a large, well vented opening and punishes a tight one.

VEVOR 36 x 12 inch Drop-in FireCheck it on Amazon
7

Stanbroil 48 x 14 Inch Rectangular Drop-in: Best for extra long fire features

Stanbroil 48 x 14 Inch Rectangular Drop-in, propane fire pit burner kits
8.5/10Our score
  • 48 x 14 inch rectangular drop in
  • Built in H-burner
  • Up to 185,000 BTUs
  • Stainless steel
  • Ignition kit with shut-off valve
  • 24 inch non-whistle stainless steel gas line
  • Air mixer
  • 4 ft regulator hose

A long 48 inch rectangular pan for large fire features, with an H-burner rated up to 185,000 BTUs.

See it on Amazon

Pros

  • Longest rectangular option here
  • High 185,000 BTU rating
  • Drilled holes for smoother gas flow

Cons

  • Needs a large ledge and opening
  • Heaviest rectangular pick here

This kit suits an extra long fire feature, such as a linear wall or a wide rectangular table. The 48 x 14 inch pan is the longest option in this guide, with a built in H-burner rated up to 185,000 BTUs.

The outer lip is 1.2 inches, and the pan rests on a ledge inside your fire feature. That ledge must support the full 48 inch length, so this is a project scale pick rather than a compact pit pick.

The package includes a burner pan, an ignition kit with shut-off valve, a 24 inch non-whistle stainless steel gas line, an air mixer and a 4 ft regulator hose. Drilled gas holes help flow, and holes at the bottom help drain water.

Stainless steel construction helps the pan resist corrosion in outdoor weather. The trade off is weight and space.

At 22 lb, it is heavy to lift into place, and the empty space below the pan needs venting for propane to burn well.

Stanbroil 48 x 14 Inch Rectangular Drop-inCheck it on Amazon
8

gohantee Fire Ring Burner Valve Assembly Kit: Best for low pressure systems

gohantee Fire Ring Burner Valve Assembly Kit, propane fire pit burner kits
8.2/10Our score
  • 12 inch double ring burner
  • 5 ft low pressure QCC inlet propane regulator
  • 5 ft low pressure extension hose
  • Key control valve
  • Air mixer valve kit
  • 304 stainless steel and brass
  • 3/8 inch male fitting
  • For systems under 90,000 BTU

A 12 inch double ring kit with 5 ft low pressure hoses and a key valve, for systems under 90,000 BTU.

See it on Amazon

Pros

  • Long 5 ft hoses for tank placement
  • Key valve for gas control
  • 304 stainless steel and brass parts

Cons

  • Low pressure only
  • Not for high pressure systems

This kit suits a low pressure propane system under 90,000 BTU. The 12 inch double ring burner pairs with a key valve, so you can control gas flow from the pit surface.

The package includes a 5 ft low pressure QCC inlet propane regulator and a 5 ft low pressure extension hose. Those long hoses help when the tank sits farther from the burner than a standard 4 ft hose allows.

Parts use 304 stainless steel and brass, with a 3/8 inch male fitting on the air mixer valve. The key and cover plate complete the control set for a panel mount.

The limit is clear. This kit is for low pressure systems only, and gohantee warns against use in a high pressure system.

If your pit needs more than 90,000 BTU, choose a higher rated kit. If you need a short hose run, the 5 ft lengths may need careful routing away from heat.

gohantee Fire Ring Burner Valve Assembly KitCheck it on Amazon
9

Skyflame 19-inch Round Stainless Steel Drop-in Fire: Best for flame sensing safety

Skyflame 19-inch Round Stainless Steel Drop-in Fire, propane fire pit burner kits
7.9/10Our score
  • 19 inch round stainless steel drop in pan
  • 50k BTU maximum
  • H-burner
  • Gas control knob
  • Spark igniter
  • Thermocouple with safety shut-off
  • Flex gas line connector kit
  • Propane regulator hose kit for 20 lb tanks

A 19 inch drop in pan with electronic spark ignition and a thermocouple that stops gas if the flame goes out.

See it on Amazon

Pros

  • Thermocouple safety shut-off
  • Electronic spark ignition
  • Complete propane hose kit included

Cons

  • Lowest BTU rating here at 50k
  • Fire pit needs to be 1.5 inch larger than the pan

This kit suits a round pit where flame sensing safety matters. The 19 inch drop in pan holds an H-burner rated at 50k BTU max, the lowest output here, so it suits a modest gathering pit rather than a large feature.

The kit includes a gas control knob, a spark igniter, a thermocouple, a flex gas line connector kit and a propane regulator hose kit for standard 20 lb tanks. Electronic spark ignition means no matches or lighter are needed to light the pit.

The thermocouple senses the flame and the safety shut-off valve stops gas flow if the flame goes out. That is a useful layer for a pit that people leave burning during a meal.

Skyflame notes the thermocouple copper wire is easy to break, so handle it with care during install.

The fire pit needs to be 1.5 inch larger than the pan. Skyflame recommends 30 lb of fire glass, not included.

Natural gas use needs a separate 50k BTU conversion kit.

Skyflame 19-inch Round Stainless Steel Drop-in FireCheck it on Amazon

How we compared these propane fire pit burner kits

We compared size, shape, BTU rating, included parts, ignition type and pressure limits across all nine kits. A complete kit scored higher than a parts only kit for a new build, while a control only kit scored well for repairs.

We checked whether each kit fits a round pit, a rectangular opening or a linear fire table. We also noted steel grade where stated, because 304 stainless steel resists outdoor corrosion better than lower grades.

Safety features shaped the scores too. Thermocouple shut-off, adjustable regulators, clear propane only limits and CSA certified accessories all count.

If you plan a full build from scratch, our diy propane fire pit guide walks through the structure around the burner.

ProductBest forBurner SizeMax BTUFuelOur score
Stanbroil Propane Gas Fire Pit Stainless Steelcompact round pits12 inch round92,000Propane (LP)9.7
Skyflame LP Burner Connection Kitreplacing controls and hosesPropane only9.6
GRISUN Upgraded 36 x 12 Inch Rectangularlinear fire tables9.5
GRISUN 12 Inch Fire Pit Burner Ring24 inch round pits12 inch roundLiquefied Petroleum Gas9.2
Hiorucet 12 Inch Fire Pit Burner Ringa large parts bundle12 inch round92,0009.0
VEVOR 36 x 12 inch Drop-in Firehigh output rectangular pits150,000Propane8.7
Stanbroil 48 x 14 Inch Rectangular Drop-inextra long fire features185,000Propane (LP)8.5
gohantee Fire Ring Burner Valve Assembly Kitlow pressure systems12 inch8.2
Skyflame 19-inch Round Stainless Steel Drop-in Fireflame sensing safety50,000Liquefied Petroleum Gas7.9

Which propane fire pit burner kit size fits a built in pit?

Measure your opening and ledge first, then pick the burner shape. A 12 inch ring suits about a 24 inch round pit.

A 19 inch pan needs a pit about 1.5 inch larger than the pan.

Rectangular pans need a ledge that supports their full footprint. A 36 x 12 inch pan needs a pit that can hold that rectangle with room for media.

A 48 x 14 inch pan needs an even larger ledge.

Round rings for round pits

Round rings work best in round pits and round fire tables. The Stanbroil, GRISUN, Hiorucet and gohantee rings are all 12 inch.

If your opening is round, start with a round ring kit.

Rectangular pans for rectangular openings

Rectangular drop in pans suit rectangular pits and long fire tables. The GRISUN 36 inch, VEVOR 36 inch and Stanbroil 48 inch pans all rest on a ledge.

Measure the ledge depth as well as the length.

Linear burners for fire tables

A linear burner creates a straight flame line for modern tables. The GRISUN 36 inch kit is the linear pick here.

Pair it with a best fire pit table style opening if you are planning the table and burner together.

How much BTU does a propane fire pit burner kit need?

Pick BTU after you pick size, then check that your tank and regulator can supply it. Round 12 inch rings here run up to 92,000 BTU max.

Rectangular pans run from 150,000 to 185,000 BTU.

Higher BTU means a taller flame and more heat, but it also uses propane faster. A 50k BTU pan, like the Skyflame 19 inch, suits a small social pit.

It will not throw the same heat as a 185,000 BTU long pan.

Low output for small pits

The Skyflame 19 inch pan at 50k BTU and the gohantee kit for systems under 90,000 BTU suit smaller features. Low output keeps flame height modest and matches a smaller media bed.

High output for large features

The Stanbroil 48 inch pan at 185,000 BTUs and the VEVOR pan at 150,000 BTU suit large rectangular features. They need a large, vented opening and a regulator that can feed them.

Round ring or rectangular drop in pan: which should you buy?

Choose a round ring for a round pit and a drop in pan for a rectangular pit. Shape fit matters more than brand.

A ring in a rectangular pit will leave uneven media gaps.

A drop in pan sits on a ledge and holds media above the burner. That design leaves space below the pan for air flow, which helps propane burn cleanly.

A ring burner sits inside the pit and needs media placed around and above it.

If you are unsure which shape your pit uses, our best round fire pit burner kit guide covers round options in more depth. For a burner that is still sound but needs new controls, a connection kit is the simpler fix.

Do you need a full kit or just a connection kit?

Buy a full kit for a new build or a full replacement, and a connection kit for a repair. A full kit adds a burner, pan or ring plus ignition, valve, regulator and hoses.

A connection kit, like the Skyflame LP kit, renews the valve, air mixer, regulator and hoses. That is enough when the burner holes are clear and the pan is not warped.

What a full kit includes

Full kits here include ignition, a shut-off valve, an air mixer, a regulator and at least one hose. Some add a wind guard, a lid or a wrench.

Check the parts list against your pit before you order.

When a connection kit is enough

Choose a connection kit if your burner works but the key valve sticks, the hose is old, or the regulator will not hold a steady flame. Our best propane fire pit hose guide helps if hoses are your main issue.

If your tank runs empty often, how to refill a propane fire pit table explains the tank side of the setup.

What ignition and safety features should a propane burner kit have?

Look for spark ignition, a shut-off valve and a regulator that matches your burner. A key valve lets you control gas from the panel instead of reaching the tank.

A thermocouple adds flame sensing shut-off, which stops gas if the flame goes out. The Skyflame 19 inch kit includes that feature.

CSA certified accessories, like the VEVOR set, add a layer of assurance for gas parts.

Spark ignition versus manual lighting

Spark ignition kits light with a push button or key turn. Some need 1 AA battery, not included.

Manual lighting needs a lighter and more care near gas flow.

Pressure limits and fuel type

Check that the kit fits propane only or the fuel you use. The Skyflame connection kit fits propane only.

The gohantee kit fits low pressure systems under 90,000 BTU only.

If you use natural gas instead, our best natural gas fire pit burner kit guide covers that fuel type.

How do you install and care for a propane fire pit burner kit?

Set the burner level, connect fittings tight, leak check, then add media. A level pan spreads flame evenly and keeps media from shifting.

Connect the regulator to a standard 20 lb propane tank first, then connect hoses to the valve and burner. Use sealing tape or thread sealant where the kit calls for it, and tighten with tools.

After lighting, cover the pit with its lid when it cools. The GRISUN linear kit includes a lid for that purpose.

Keep hoses away from flame and high heat, and close the gas when the pit is not in use.

Propane pits need venting below the pan or ring. Blocked vents can starve the flame of oxygen.

If you are unsure about gas connections, hire a professional, as Stanbroil suggests for its kit.

Verdict: which propane fire pit burner kit should you buy?

Buy the Stanbroil 12 inch kit for a small round built in pit, the Skyflame connection kit for a repair, and a rectangular pan only when your opening is rectangular. That rule covers most buyers.

Pick the GRISUN 36 inch linear kit for a modern fire table with a wind guard and lid. Pick the Stanbroil 48 inch pan for an extra long feature.

Pick the Skyflame 19 inch pan if flame sensing shut-off matters most.

Measure your opening, check pressure limits, and confirm what is in the box before you order. Then match the kit to the pit you have, not the pit you wish you had.

Our top 3 picks at a glance

  1. 1 Stanbroil Propane Gas Fire Pit Stainless Steel
    Best for compact round pits

    Stanbroil Propane Gas Fire Pit Stainless Steel

    9.7/10 our score

    See it on Amazon
  2. 2 Skyflame LP Burner Connection Kit
    Best for replacing controls and hoses

    Skyflame LP Burner Connection Kit

    9.6/10 our score

    See it on Amazon
  3. 3 GRISUN Upgraded 36 x 12 Inch Rectangular
    Best for linear fire tables

    GRISUN Upgraded 36 x 12 Inch Rectangular

    9.5/10 our score

    See it on Amazon

Frequently asked questions

What size propane fire pit burner kit do I need?

Match the burner to your opening first, not to BTU. A 12 inch ring suits about a 24 inch pit, a 19 inch pan needs a pit about 1.5 inch larger, and rectangular pans need a ledge that fits their full length and width.

Measure the inside opening and ledge before you order.

Can I replace just the hose and valve on a propane fire pit?

Yes, if your burner ring and pan are still sound. A connection kit adds a key valve, air mixer, regulator and hoses without a new burner.

Check pressure limits and fittings first, because some kits are low pressure only and fit propane only.

How much fire glass does a 12 inch burner need?

GRISUN recommends 15 lb of fire glass for its 12 inch ring kit. Skyflame recommends 30 lb for its 19 inch pan.

Fill amount depends on pan depth and opening size, so use the kit maker's amount as a starting point and keep media clear of the burner holes.